Industrial Pumps

Overview
Theses pumps are constructed rigidly to ensure vibration free operation. Hydraulic design is being updated with our continuous R&D efforts to meet requirements of higher efficiency and lower submergence, taking care of other parameters such as, high reliability and optimum system design.

Features :

• Vibration-free performance
• Low submergence
• No priming required
• Dry pit/Wet pit arrangement available
• Direct drive/Right angle gear drive
• Impeller pull-out/Non-pull-out
• Bowl pull-out/Non-pull-out
• Gland packed / Mechanical seal
• 50Hz / 60Hz availability

Applications :

• Water supply Pumps
• Irrigation Pumps
• Cooling tower
• Thermal and Nuclear power plants
• Steel, Cement industries
• Refineries
• Sea water on off-shore platforms
• Condensate extraction
• Fire fighting Pumps
• Flood control
• Dry Docks

Overview
These pumps are of multistage and have a modular construction. These are either gland packed or mechanically sealed and can be of either electrical drive or engine drive. These are widely used in air conditioning, boiler feed, petroleum, chemical and process industries and so on.

Features :

• Conforming to DIN 24254
• Flanges to DIN 2501 PN 40
• Channel Multistage, Modular Construction
• Self priming
• Gland Packed / Mechanical Seal
• Electrical Drive / Engine Drive

Applications :

• Petroleum, Chemical and Process Industry
• Air Conditioning
• Boiler Feed
• Domestic
• Ship/Naval Engineering
• Liquid with Gas mixture

Overview
These pumps are called Concrete Volute Pumps (CVP) because the casing and suction draft tube is cast in-situ concrete with rotating metallic part. These pumps comprise concrete volute casing, draft tube, grouted embedded, components and rotating assembly. These pumps find applications where large quantity of flow is required to be handled, most suitable for sea water application. Some of the advantages of KBL manufactured CVPs are high reliability, design simplicity, superior operating performance, vibration free equipment and low maintenance cost.

Features

• High Reliability
• Design Simplicity
• Excellent Corrosion Resistance
• Superior Operating Performance
• Vibration-Free Performance
• Low Submergence
• Low Maintenance Cost

Applications

• Thermal and Nuclear power plants
• Water supply Pumps
• Irrigation Pumps
• Flood control
• Storm water
• Dry Docks

Overview
These pumps are used for irrigation and water supply application. They are supplied with direct/pulley drive and are electric motor driven or engine driven. Delivery size varies from 50 mm to 150 mm with a power rating of 2.2 kw to 18.33 kw.

Features :

• Back pull-out design
• Gland packed / Mechanical seal
• 50HZ / 60 HZ availability

Applications :

• Aqua Culture
• Irrigation
• Sugar Industries
• Water Supply

Overview

Kirloskar Brothers Limited has been supplying Fire Protection Packages for many decades. The most important aspect of Fire Protection package is the reliability of the fire fighting pumping system to ensure adequate water supply at required pressure at emergency conditions.

Offerings

• FM Approved UL Listed Fire Fighting Set
• Standard Fire Fighting Set
• Multi Stage Multi Outlet (MSMO) Fire Fighting Set
• Containarised Fire Fighting Set

Highlights Of KBL Fire Fightings Pumps

• Diesel engine driven pumpset
• Main fire pump – FM approved / UL listed
• Diesel engine – FM approved / UL listed heat exchanger cooled
• Engine Controller – FM approved / UL listed
• Secondary water – cooling loop
• Space saving solution – Multistage multi outlet pump
• Packaged Fire Pump House
• Jockey pump with controller mounted on separate skid where controller is FM approved or UL listed.

Overview
Canned Motor Pump is a centrifugal pump with hermetically sealed electric motor mounted on single shaft thus eliminating the requirement of mechanical seal or other sealing device. Entire rotating assembly is immersed in the liquid, and motor stator and rotor are isolated from the pumped liquid with corrosion resistant, non-magnetic liner and sleeve. A part of the pumped liquid is by-passed through the motor, for cooling of motor and lubricating the bearing.

Features :

• No seal-no leakage
• No coupling-no alignment and no vibration problem
• No separate lubrication of bearing and no contamination of lubricant
• No antifriction bearings
• Small and compact design resulting in saving in installation space
• Extremely low noise level
• Absolute safety from risks of fire, explosion and leakage
• Automatic thrust balancing
• Vacuum tight construction prevents air contamination of process liqui

Applications :

• The high reliability of these pumps makes them suitable for pumping of toxic, hazardous liquids, high temperature, high pressure services in nuclear power plant, Lithium
• Bromide circulation in refrigeration plant, Ammonia transfer in fertilizer plants, refineries, chemical and pharmaceutical industries and other process industries for handling toxic, hazardous or expensive fluids.

Overview
Kirloskar KSIL, KCIL are vertical multistage centrifugal pumps. The in-line design enables installation of the pump in horizontal one pipe systems. The suction and discharge ports are of same dimension and are in the same horizontal plane. This arrangement insures a compact design and calls for a simpler piping systems.

Features

• Energy Efficient
• Compact and Aesthetical Design
• Corrosion Resistant
• Reliable Sealing
• Ease of Maintenance
• Durable
• Light Weight
• Low Noise Level

Applications

• Water Supply
• Industrial Pressure Boosting
• Liquid Transfer
• Water Treatment
• Building Industry
• Dairy
• Irrigation
• Small Power Plants

Overview
SHM are horizontal non-clog pumps having single stage, single suction with back pull out type design. SHS are vertical non-clog pumps for wet pit applications. The pump section is suspended by a column pipe which also protects the transmission shaft. These pumps can be offered with a column length up to 6.5 m. The impeller is single suction type non-clog, free flow dynamically balanced. For SHM pumps the standard lubrication is grease and the optional one is oil. In case of SHS pumps the lubrication is grease based. These pumps are widely used in paper industries, water carrying gravel and so on.

Features :

• Solid size up to 105 mm
• Back pull-out design
• Gland packed / Mechanical Seal
• 50 Hz / 60 Hz availability
• Also available in vertical execution

Applications :

• Sludge
• Sewage
• Power material slurries
• Sugar factory waste

Overview
SHM are horizontal non-clog pumps having single stage, single suction with back pull out type design. SHS are vertical non-clog pumps for wet pit applications. The pump section is suspended by a column pipe which also protects the transmission shaft. These pumps can be offered with a column length up to 6.5 m. The impeller is single suction type non-clog, free flow dynamically balanced. For SHM pumps the standard lubrication is grease and the optional one is oil. In case of SHS pumps the lubrication is grease based. These pumps are widely used in paper industries, water carrying gravel and so on.

Features :

• Solid size up to 105 mm
• Back pull-out design
• Gland packed / Mechanical Seal
• 50 Hz / 60 Hz availability
• Also available in vertical execution

Applications :

• Sludge
• Sewage
• Power material slurries
• Sugar factory waste

Overview
These pumps are of single stage with back pull out type suitable for 3500 rpm. These are either gland packed or mechanically sealed and delivery size can be up to 125 mm. These are very useful in air conditioning, water supply, fire-fighting and booster services.

Features :

• Confirming to DIN 24256 and ISO 2858
• Single stage with back pull-out type design
• Suitable for 3500 rpm
• Gland Packed / Mechanical Seal

Applications :

• Air conditioning
• Fire fighting
• Booster services
• Water supply
• Sprinkler system
• Handling clear and turbid water up to 3000 ppm

Overview
These pumps are developed for process applications and are generally conforming to API 610. These are gland packed or mechanically sealed. These pumps are ideal for air conditioning, condensate extraction, distilleries, edible oil sugar and textile. Delivery size ranges from 20 mm to 200 mm.

Features :

• Gland Packed/Mechinical Seal
• 50 HZ / 60 HZ availability

Applications :

• Fertilizer
• Sewage
• Petrochemical
• Refinery

Overview
These pumps can withstand wide voltage fluctuations from 180-240 volts. The motor body is of aluminium extruded. The impeller is of forged brass and delivery casing is made of cast iron. These pumps are very useful in water supply for domestic use in bungalows, apartments, hotels and hospitals.

Features :

• Withstand wide voltage fluctuation from 180 to 240 Volts
• Self Priming upto7.5 meters
• Aluminium extruded motor body
• Top mounted big terminal box
• Capacitor inside terminal box
• Fitted with thermal overload protector (TOP), for life

Overview
These are single and three phase, end suction monobloc pumps with portability. These are noiseless pumps and available in stainless steel.

Features :

• Withstand wide voltage fluctuation from 180 to 240 Volts
• Self Priming upto7.5 meters
• Aluminium extruded motor body
• Top mounted big terminal box
• Capacitor inside terminal box
• Fitted with thermal overload protector (TOP), for life

Applications :

• Domestic Water Supply
• Domestic Pressure Booster Systems
• Sprinklers and Gardening

Overview
RKB is a multistage centrifugal side suction, vertical delivery, horizontal pump with diffuser type casing. Pump shaft is supported in anti-friction bearings. Enclosed impellers are of radial flow type provided with balancing holes. These pumps have standard lubrication of grease and are suitable for coupling with electric motors.

Features :

• Gland Packed / Mechanical Seal
• 50 Hz / 60 Hz availability

Applications :

• Fire-fighting
• Booster Service
• Mine Dewatering
• Boiler feed